Текст страницы
Adjust the recording level of inbuilt mics for Panasonic Camera
10.Setting The Recording Level Correctly
RX Receiver
Warranty
(Take LUMIX GH5 for example)
WARRANTY CERTIFICATE
Warranty Period
Product Model:
Wireless Transmission
RF Frequency Band
Working Distance
Date of Purchase:
6. Noise Cancellation
Short press the noise cancellation button on the transmitter to switch
between noise-control modes:
① Noise Cancellation Off
② Low-Level Noise Cancellation
③ High-Level Noise Cancellation
Serial Number:
Camera devices generally have poor-quality, noisy preamps. In order to
get the cleanest signals possible, it is highly recommended that you set
the recording level on your camera quite low, 1/2 or 1/3 of it.
G2 provides variable gain control, allowing you to tailor your levels to just
about environment and recording device.
Malfunction Description :
Adjust the recording level of inbuilt mics for SONY Camera
Latency
Mounting
Number of Audio Channels
(Take A7S Ⅱ for example)
Audio Output
Buyer Name:
Buyer Telephone :
Noise Cancellation Off
High-Level Noise
Cancellation
Low-Level Noise
Cancellation
Buyer Mail :
Thank you for purchasing SYNCO products.
1. Customers are entitled to free replacement or repair service in case of
quality defect(s) found in the product under normal use within 30 days
upon receipt of the product.
2. Original SYNCO products are entitled to 12-month limited warranty
service. The warranty period begins on the date of purchase of brand new,
unused products by the first end-user.
Within the warranty period, if product defect or failure is attributable to
material defection or technological problem, the defective product or
defective part will be repaired or replaced without charge (service and
materials fee).
Buyer Address :
Warranty Exclusions and Limitations
Specifications
Dealer :
TX Transmitter
Dealer Telephone :
7.Switch the Channel Mode
Short press the power button on the RX to switch the mono/stereo/safety
channel mode.
Default mono mode.
Delivery Date :
Cause of Malfunction :
Volume Adjustment
Power Requirements
Battery Type
Battery Charging Time
Battery Life
Display Screen
Dimensions
Material
Weight
Digital 2.4GHz
2400-2483.5MHz
656ft/200m (LOS area)
164ft/50m (NLOS area)
20ms
Pocket Clip
2
3.5 mm TRS Mic Output
3.5 mm TRS Headphone Output
Type-C Output
6 levels (0-3-6-9-12-15)/(0~30dB)
5V 1A
Built-in Lithium Battery, 400mAh
2H
8H
TFT Screen
52X42X17mm
ABS
39g
Maintenance Personnel :
Adjust the recording level of inbuilt mics for Canon Camera
Malfunction Processing :
(Take EOS 5D Mark Ⅳ for example)
Microphone
8.Charging
Connect the charging cable through Type-C port of TX and RX，and fully
charged in about 2 hours.
( Note: The grey end of the 3-in-1 charging cable included in the package
can be used for digital output. )
Faults resulted from inappropriate use of a product without following its
operation specification：
1. Artificial damage, e.g. crash, squeeze, scratch, or soaking
2. Modifications to a product by its user or a third party without prior
written consent of SYNCO, e.g. replacement of element or circuit, label
alteration
3. The code on product is inconsistent with that of warranty certificate, or
the code on the product or warranty certificate is altered or torn off
4. All consumable accessory attached to a product, like cable, wind muff,
battery
5. Faults as a result of force majeure, such as fire, flood, lightning, etc.
9. Mic Windshield & Device Installation
Screw to mount the windshield.
Form Factor
Frequency Range
Sensitivity
Maximum SPL
Built-in/External Mic
50Hz-20KHz
-35dB（±3dB，re 1V/Pa at 1 KHz）
120dB SPL（at 1KHz）
Warranty Claim Procedure
*Please register your warranty. Meanwhile, you are welcomed to contact us via Email：
support@syncoaudio.com
Wireless Transmission
RF Frequency Band
Working Distance
Mounting
Audio Input
Power Requirements
Battery Type
Battery Charging Time
Battery Life
Display Screen
Dimensions
Material
Weight
Digital 2.4GHz
2400-2483.5MHz
656ft/200m (LOS area), 164ft/50m (NLOS area)
Pocket Clip
3.5 mm TRS Mic Input
5V 1A
Built-in Lithium Battery, 400mAh
2H
8H
TFT Screen
52X42X17mm
ABS
39g
TX
RX
1. If failure or any problem occurs to your product after purchase, please
contact a local agent for assistance, or you can always contact SYNCO’s
customer service through email at support@syncoaudio.com.
2. Please retain your sales receipt and warranty certificate as proof of
purchase. If any of these documents is missing, only sales return or
chargeable service will be provided.
3. If the SYNCO product is out of the warranty coverage, the service and
the parts cost will be charged.
Guangzhou Zhiying Technology Co., Ltd
Room 2401, 24 / F, South Tower, Lisheng Plaza, No. 68 Huadi Avenue, Liwan District,
Guangzhou, China, 510000
support@syncoaudio.com
www.syncoaudio.cn