Текст страницы
Parameter
Description
From the Resolution list, select a resolution for video output.
Resolution
The maximum video resolution may vary model to model.
From the Bit Rate Type drop-down list, select resolution for the video.
Bit Rate Type
The maximum video resolution might be different dependent on your
device model.
Configure the frames per second for the video. The higher the value, the
clearer and smoother the image will become. Frame rate changes along
with the resolution.
Frame Rate (FPS)
Generally, in PAL format, you can select the value from 1 to 25; in NTSC
format, you can select the value from 1 to 30. However, the specific
range of frame rate that you can select depends on the capability of the
DVR.
This function is available if you select VBR in the Bit Rate List.
Quality
The higher the value, the better the image will become.
I Frame Interval
The interval between two reference frames.
Bit Rate (Kb/S)
From the Bit Rate drop-down list, select a value or enter a customized
value to change the image quality. The bigger the value is, the better
the image will become.
Video
Enable the function for sub stream.
Audio
Click More, the More interface is displayed.
Audio Source
●Audio: This function is enabled by default for main stream. You need
to manually enable it for sub stream 1. Once this function is enabled,
the recorded video file is composite audio and video stream.
●Audio Source: In the Audio Source list, you can select LOCAL and
HDCVI.
Compression
LOCAL: The audio signal is input from Audio input port.
HDCVI: The audio signal is input from HDCVI camera.
●Audio Format: From the Compression drop-down list, select a
format as needed.
Step 3
Click Apply.
You can click Copy to to copy the settings to other channels.
1.5 Adding IP Camera
You can add an IP camera by search result or by manually entering IP information. Before adding IP
camera, you shall change at least one analog channel to IP channel.
Cameras you want to add must be in the same network with the DVR.
8