Текст страницы
Figure 1-18 Configure manual add parameters
Table 1-5 Manual add parameters
Parameter
Description
Channel
From the Channel drop-down list, select the channel that you want use on
the DVR to connect the remote device.
Manufacturer
From the Manufacturer drop-down list, select the manufacturer of the
remote device.
In the IP Address field, enter the IP address of the IP camera.
IP Address
Change the default value (192.168.0.0) which the system cannot connect to.
RTSP Port
The default value is 554. You can change the value as needed.
The default value is 80. You can change the value as needed.
HTTP Port
If you enter another value, for example, 70, and then you should enter 70
after the IP address when logging in to the DVR by browser.
TCP Port
The default value is 37777. You can change the value as needed.
19