Текст страницы
EN
EN
Routine Maintenance
Routine Maintenance
Robot Sensors
Charging Contacts and Signaling Area
Dust Box and Filter
3. Gently tap the basket of the filter to remove the dirt.
Clean the charging contacts and the signaling area with a soft and dry cloth.
Wipe robot sensors by using a soft and dry cloth, as shown in the below
1. Open the robot's cover and press the clip to remove the dust box.
figure:
Laser Distance
Sensor (LDS)
Dock Sensors
3D Line Laser Sensor
Note: Do not attempt to clean the filter with a brush, a finger or sharp
objects to prevent damage.
Edge Sensor
Cliff Sensors
4. Rinse the dust box and filter with water and dry them completely
before reinstalling.
Carpet Sensor
2. Remove the dust box filter, and then empty the dust box.
12
1
11
2
10
Battery
3
9
24 hrs
4
8
5
7
6
The robot contains a high-performance lithium-ion battery pack. Make sure
that the battery remains well-charged for daily use to maintain optimal
battery performance. If the robot is not used for an extended period of
time, turn it off and put it away. To prevent damages from over-discharging,
charge the robot at least once every three months.
Note: A wet cloth can damage sensitive elements within the robot and the
charging dock. Please use a dry cloth for cleaning.
Note:
· Rinse the dust box and filter with clean water only. Do not use any detergent.
· Use the dust box and filter only when they are completely dry.
17
18