Текст страницы
EN EN Safety Information
Safety Information
Usage Restrictions
Batteries and
Charging
· Do not use any third-party battery, power cord, or charging dock. Use only with
RCS0 supply unit.
· Do not attempt to disassemble, repair, or modify the battery or charging dock
on your own.
· Do not place the charging dock near a heat source.
· Do not use a wet cloth or wet hands to wipe or clean the dock's charging
contacts.
· Do not improperly dispose of old batteries. Unneeded batteries should be
discarded at an appropriate recycling facility.
· If the robot will not be used for an extended period, fully charge it, then turn
it off and store in a cool, dry place. Recharge the robot at least once every 3
months to avoid over-discharging the battery.
· This product contains batteries that can only be replaced by qualified
technicians or after-sales service.
Laser Safety
Information
the appliance.
· Keep hair, fingers, and other body parts away from the suction opening of the
robot.
· Keep the brush cleaning tool out of reach of children.
· Do not place children, pets, or any item on top of the robot regardless of
whether it is stationary or moving.
· Do not use the robot to clean any burning objects. Do not use the robot to pick
up flammable or combustible liquids, corrosive gases, or undiluted acids or
solvents.
· Do not vacuum hard or sharp objects. Do not use the appliance to pick up
objects such as stones, large pieces of paper or any item that may clog the
appliance.
· Make sure the robot is turned off and the charging dock is unplugged before
cleaning or performing maintenance.
· Do not use a wet cloth to wipe or any liquid to rinse the robot and charging
dock. Washable parts must be dried completely before installing and using
them.
· Make sure the robot is turned off when being transported and kept in its
original packaging if possible.
· Please use this product in accordance with the instructions in the User Manual.
Users are responsible for any loss or damage that arise from improper use of
this product.
· The laser sensor in this product meets the IEC 60825-1:2014/EN 60825-1:2014/
A11:2021 Standard for Class 1 laser products. Please avoid direct eye contact
with it during use.
CLASS 1 LASER PRODUCT
CONSUMER LASER PRODUCT
EN 50689:2021
2
3