Текст страницы
D11 Charging Contact Areas
A dirty mop cloth will affect the washing performance.
Clean it before use.
Note:
Basic Parameters
* Clean monthly.
Robot
D7-2—Stick the mop cloth on the mount in
position and firmly.
Use a soft dry cloth to wipe the charging
contacts on the robot and the dock.
Model
QR1PES
D8 Robot Sensors
D12 Replacing Disposable Dust Bag
* Clean as required.
Battery
14.4 V/5200 mAh (TYP)
lithium-ion battery
* Replace as required.
Rated Input
20VDC 1.5A
D12-1—Remove the dust container cover.
Use a soft, dry cloth to wipe and clean all
sensors, including:
Charging Time
Approx. 4 hours
D12-2—Remove the disposable dust bag in the
direction of the arrow and discard it.
Notes:
The serial number is on a sticker on the underside
of the robot.
Note:
Empty Wash Fill Dock
D8-1—Dock Locator
D8-2—Reactive Tech Obstacle Avoidance Sensor
D8-3—Wall Sensor
D8-4—Communication Sensor
D8-5—The Carpet Sensor
D8-6—Four Cliff Sensors
• The dust bag handle seals the bag on removal to
prevent leakage.
• Always install a dust bag before closing the dust
container cover to avoid auto-emptying without the
bag. You can also disable auto-emptying in the app.
Model
EWFD16HRR
Rated Input Voltage
220-240VAC
D9 Moving Dock
Rated Frequency
50-60Hz
Rated Input (Dust
collection)
3A
D12-3—Clean around the filter with a dry
cloth. Install a new disposable dust
bag in place along the slot and
unfold the dust bag to maximize
emptying performance.
Lift up and move the dock. Do not move the
dock by lifting the dock base, water tank handles
or dust container cover directly to prevent
the dock from falling off.
Make sure the disposable dust bag is properly
sealed to avoid waste escaping and damaging the dock.
Note:
D10 Dirty Water Tank
Rated Input
(Hot water washing
mop)
5.6A
* Clean as required.
D12-4—Close the dust container cover and
make sure it is securely sealed.
Rated Input
(Charging & drying)
0.6A
D13 Cleaning Tank
Rated Output
20VDC 1.5A
* Clean as required.
Open the dirty water tank lid and pour out
the dirty water. Fill the tank with clean water,
close the lid, and shake. Pour out the dirty
water. Close the lid and then re-install.
D13-1—Remove the cleaning tank.
Charging Battery
14.4 V/5200 mAh (TYP)
lithium-ion battery
D13-2—Rinse the cleaning tank and the filter
with water.
D13-3—Reinstall the cleaning tank.
40