Текст страницы
D15 Cleaning Tray of Edgewise
Basic Parameters
Mopping Module
other hand. Do not lift the dock base, dock
cover, or dust container door directly to
prevent the dock from falling off.
Robot
* Clean as required.
D15-1—Remove the cleaning tray.
Model
S90VER
D12 Dirty Water Tank
D15-2—Rinse the cleaning tray with water.
* Clean as required.
D15-3—Reinstall the cleaning tray.
Battery
14.4 V/6400 mAh
(TYP) lithium-ion
battery
D16 Replacing Disposable Dust Bag
Rated Input
20 VDC 2.5 A
* Replace as required.
Open the dirty water tank lid and pour
out the dirty water. Fill the tank with clean
water, close the lid, lock the latch, and
shake. Pour out the dirty water. Lock the lid
and reinstall the tank.
The serial number is on a sticker on the underside
of the robot.
Note:
D16-1—Press the dust container door to
open it.
To prevent damage, do not pull the door open.
Note:
Empty Wash Fill Dock
D16-2—Remove the disposable dust bag
and discard it.
Notes:
• To avoid deformation, only use cold water.
• If any water stains remain on the outside of the
water tank, wipe them with a soft, dry cloth before
reinstalling the tank.
Model
EWFD32HRR
D13 High-Speed Maintenance
Rated Input
Voltage
220-240 VAC
Brush
* Clean as required and replace every 6-12 months.
Rated Frequency
50-60 Hz
Notes:
• The dust bag handle seals the bag on removal to
prevent leakage.
• Always install a dust bag before closing the dust
container door to avoid auto-emptying without the
bag. You can also disable auto-emptying in the app.
Rated Input (Dust
collection)
3 A
D16-3—Clean the filter with a dry cloth,
insert a new disposable dust bag
into the slot all the way in, and
spread it evenly.
Lift the high-speed maintenance brush
latch and remove the brush. Remove
any entangled objects in the high-speed
maintenance brush and rinse it clean.
Reinstall the brush and latch it in place.
Rated Input
(Hot-water mop
washing)
5.8 A
Make sure the disposable dust bag is properly
installed to avoid waste escaping and damaging the dock.
Note:
D14 Water Filter
* Clean as required.
Rated Input
(Charging & drying)
0.9 A
D16-4—Close the dust container door to
make sure the dust container is
securely sealed.
Rated Output
20 VDC 2.5 A
Pull out the water filter by its latch. Rinse it
with water, use a soft, dry cloth to wipe the
cleaning sink, and then reinstall the filter.
Press down the filter until you hear it lock
with a click.
45