Текст страницы
Chapter 1 Introduction
LED
Status
Indication
On
Device is connected.
Blinking
Device is connecting.
Off
No device is connected.
On
Indicates the signal strength received from the mobile internet
network. More lit LEDs signify a better signal strength.
Off
There is no mobile internet signal.
1. 2. 2.
Rear and Side Panels
The following items are located on the rear and bottom panels.
Item
Description
4G/3G External Antenna
Ports
Connect external antennas (if any) to strengthen the LTE network.
Press and hold this button for more than 5 seconds to reset the router.
WPS/RESET Button
Press for 1 second to use the WPS function.
Ethernet Port 1
LAN port only. Used to connect a local device.
LAN/WAN port.
By default, this port is used as the LAN port to connect a local device.
Ethernet Port 2
When the router is set to Wireless Router mode, it can be used as the WAN
port to connect the DSL/cable Modem or Ethernet outlet. To change to this
mode, refer to Set Up the Router in Wireless Router Mode.
03