Инструкция роутер Mercusys MB130-4G

Chapter 11 Specify Your Network Settings

Note:
•
Before you enable VPN Server, we recommend you configure Dynamic DNS Service (recommended) or assign a
static IP address for router’s WAN port and synchronize your System Time with internet.
•
The first time you configure the OpenVPN Server, you may need to Generate a certificate before you enable the VPN
Server.

3. Select the Service Type (communication protocol) for OpenVPN Server: UDP, TCP.

4. Enter a VPN Service Port to which a VPN device connects, and the port number

should be between 1024 and 65535.

5. In the VPN Subnet/Netmask fields, enter the range of IP addresses that can be

leased to the device by the OpenVPN server.

6. Select your Client Access type. Select Home Network Only if you only want the

remote device to access your home network; select Internet and Home Network if
you also want the remote device to access internet through the VPN Server.

7. Click Save.

8. Click Generate to get a new certificate.

Note:
If you have already generated one, please skip this step, or click Generate to update the certificate.

9. Click Export to save the OpenVPN configuration file which will be used by the remote

device to access your router.

Step 2. Configure OpenVPN Connection on Your Remote Device

52