Текст страницы
EN
MOUNTING OF THE LOGO PLATE
1
Mount a logo plate to the masking cover
1
2 using the
attached fastening parts.
• Align the
so that the mounting
masking cover 2
holes are at the bottom.
5
• Install
on the front side of the
logo plate 1
masking cover
by inserting its feet into the
2
mounting holes.
4
• Fix the
inside the masking cover
logo plate 1
2
using the supplied rubber spacers (if included),
tight the screws into the feet of the logo plate 1.
2
3
MOUNTING OF THE TELESCOPIC COLUMN
• On the mounted hood attach the the masking
3
cover and telescopic column on it.
2
4
• Pull out the telescopic column 4 on the
demanded height. Mark the level of the mounting
holes. Remove the telescopic column.
• Place the hanger 5 of the top telescopic column 4
at the level of mounting holes and install the
hanger.
• Hang the telescopic column 4 to the hood’s body
and to the wall hanger using appropriate screws.
• Connect the hood to the power supply network.
10