Инструкция смартфон Samsung Galaxy Z Flip7 FE

Disassembly and Assembly

Disassembly and Reassembly for replacement

• The product’s composition may vary depending on the country, region, or carrier.

• Repairable parts may vary depending on the country or region.

Before disassembling:

• Unplug and turn off device before disassembling.

• Wear an anti-static wrist strap and connect it to the grounded ESD safe mat.

Before reassembling:

• Remove the adhesive tape residues perfectly.

• Prepare all existing screws of this device and adhesive tapes.

• Wear an anti-static wrist strap and connect it to the grounded ESD safe mat.

• Leaving screws inside the device may damage internal components, such as the
battery. When assembling, be extra careful not to leave any unassembled screws
inside the device.

For all cases of broken glass:

1 Wear safety goggles and cut-resistant gloves.

2 Remove the release film of the acrylic protective cover.

3 To prevent injuries and scattering caused by broken glass, attach an acrylic protective cover.

If your device’s glass breaks, be careful not to injure your hands or other body parts on debris.

4 Press the acrylic protective cover with strong force so that it is strongly attached to the glass.

Wait more than 5 minutes until the bond between the acrylic protective cover and the glass is strengthened.

5 Follow the disassembly steps in this guide.

65