Текст страницы
Correct installation of the device
WARNING! Incorrect installation of the device can lead to cause excessive
noise, vibration and water leakage.
Before installing the appliance, make sure that the mains voltage is corresponds
to the rated supply voltage of the device indicated on the nameplate on the body.
The washing machine must be installed and operated in room equipped with a
sewer drain.
Keep children away from the installation site.
Remove the protective film from the control panel (if applicable on your model).
Place the machine on a firm and level floor surface, preferably in the corner of
the room.
Make sure all four feet are firmly on the floor and that the machine is well leveled
(use a spirit level).
Do not place the washing machine on carpet or hardwood floors.
Make sure the ventilation holes at the base of your machines (if any on your
model) are not carpeted or closed with other similar materials.
Inclined surface
Bracket mounting
Uneven surface
Removing the transport bolts
CAUTION:
DAMAGE TO THE APPLIANCE OR INJURY POSSIBLE
• The washer is secured for transport with transport bolts. Transport bolts
that are not removed can damage the drum during operation of the washing,
the washer will vibrate, and it will be much noisier during spin cycles if the
transport bolts are not removed before use. Be sure to remove all 4 transport
bolts completely before first use. Keep the transport bolts. If a pedestal was
purchased with the washer, it must be installed first, prior to removing the
transport bolts. Please consult the pedestal installation instructions.
• In order to prevent transport damage during later transport, be sure to
re-install the bolts before transport.
57
www.hiberg.ru