Текст страницы
CAUTION: do not install where temperatures may reach freezing.
Set-in Installation
Install the washer with easy access to the power plug and socket.
Install the washer where there is enough space around it.
(a) 3 cm or more above.
(b) 5 cm or more behind.
(c) 2 cm or more on the left side.
(d) 2 cm or more on the right side.
(e) 64 cm or more.
CAUTION: do not let metallic
portions of the washer come into
contact with metal sinks or other
appliances.
LEVELING THE WASHER
Importance of leveling the washer
The washer uses high spin speeds to remove water at the end of the wash
cycle. It is important that the washer is level and that the washer feet press with
equal pressure against the floor. This will help assure the quietest, most vibration-
free use of the washer.
Follow these steps:
1. Install the washer on a level and solid surfaces. Preferably in a corner of a room.
2. If the floor is uneven (or out of level ) adjust the washer feet as required to
level the washer. Do not place anything under the washer feet to help level the
washer.
3. Extend the washer feet no more than is necessary. The more the feet are
extended, the more vibration the washer will experience. Start with the washer
feet turned all the way in and adjust each foot as necessary.
4. Use a bubble level (no supplied) to check the top of the washer to make sure it
is level side to side and front to rear.
59
www.hiberg.ru