Текст страницы
AUTOMATIC WASHING MACHINE
TECHNICAL MAINTENANCE
All electronic components (plug, electric cord, compressor, etc.) must only be re-
installed in certified service centers by qualified personnel.
In the event of a malfunction, you should always contact an authorized service cent
er, specifying the type of problem and the model of your washing machine. Unqualified
repair removes the device from warranty service. Only original spare parts can be used
to repair the device.ли.
TROUBLESHOOTING
During operation, if any malfunctions are detected that the consumer cannot elimi
nate on their own, it is necessary to contact the service center for the repair of washing
machines.
But before contacting the repair service, read this section. This list includes the most
common cases that are not the result of poor assembly quality or poor-quality materials
used in this device.
ATTENTION! Before troubleshooting, you must disconnect the product from
the mains. Troubleshooting that is not described in this manual should only be
carried out by a qualified electrician or a competent technician.
Malfunction
Possible reason
Remedy
Start / Pause button was not
pressed
Press the Start / Pause button
Program does not start
after closing the door.
Selection knob to select another programme.
Previous programme will be cancelled.
Washing machine has
switched to self protection
mode due to a supply
problem
Machine might be standing
unbalanced
Adjust the feet to level the machine
A hard substance might have
entered into the pump filter
Clean the pump filter.
Transportation safety bolts
are not removed.
Remove the transportation safety bolts
Machine vibrates or
makes noise.
Laundry quantity in the
machine might be too little.
Add more laundry to the machine.
Machine might be
overloaded with laundry
Take out some of the laundry from the machine
or distribute the load by hand to
balance it homogenously in the machine.
It will resume running when the voltage restores
to the normal level.
Machine stopped
shortly after the
programme started.
Machine might have stopped
temporarily due to low
voltage
41
USER GUIDE