Текст страницы
СТИРАЛЬНАЯ МАШИНА АВТОМАТ
СТИРАЛЬНАЯ МАШИНА АВТОМАТ
AUTOMATIC WASHING MACHINE
AUTOMATIC WASHING MACHINE
Detergent
residues in
the box
Washing powder is dampened
and agglomerated.
Clean and wipe the box.
Use liquid detergents or the
detergents
special for drum.
“Cotton Eco 60°C/40°C” is the standard washing programs to which the information
in the label and the fiche relates, and they are suitable to clean normally soiled cotton
laundry and that they are the most efficient programmes in terms of combined energy
and water consumptions for washing that type of cotton laundry,that the actual water
temperature may differ from the declared cycle temperature.
Note!
The clothes are too dirty.
Insufficient detergent quantity.
The parameters in this table are only for user’s reference. The actual parameters may
be different with the parameters in above mentioned table.
Washing
effects are
not good
Select a proper procedure.
Add the proper detergent
quantity according to the
instructions in detergent
package.
Common fault analysis and solutions
Troubles
Reason
Solution
Abnormal
noise
Great
vibration
Washing
machine
cannot start up
Check if the door is closed tightly.
Check if power plug is inserted well.
Check if water supply tap is opened.
Check if button “Start/Pause” is pressed.
Check if button “On/Off” is pressed.
Disconnect the power.
Check if the fixing (bolts) has
been removed.
If cabinet is installed on the
solid and level floor.
Check if there are any
barrettes or metal articles
inside.
Check if the legs in the
washing machine are adjusted
level.
Troubleshooting guide
Door cannot be
opened
Machine's safety protection
design is working.
Display
LED
Description
Reason
Solution
Heating fault
NTC is damaged and heating pipe is
aging.
Can normally wash the clothes.
Only cannot wash with heating.
Shall contact the service center
promptly.
E30
Door lock problem
Door is not closed
properly.
Restart after the door is
closed.
Water leakage
E10
The connection between inlet
pipe or outlet hose and tap or
washing machine is not tight.
Drain pipe in the room is blocked.
Check and fasten water pipes.
Clean up outlet hose and ask a
specialized person to repair it
when necessary.
Water injecting
problem while
washing
Tap is not opened or
water flows too slowly.
Inlet valve filter is blocked.
Inlet pipe is twisted. If
water is not supplied.
Open the tap or wait
till the water supply
becomes normal.
Check inlet valve filter.
Straighten the water
pipe. Check the other
taps in the room.
Fix the inlet pipe.
Replace the drain hose.
The inlet pipe is not connected
firmly.
Outlet hose has water leakage.
E21
Drain problem while
washing
Outlet hose is blocked
or twisted. Drain pump is
blocked
Wash and straighten
outlet hose. Wash drain
pump filter
Water is
overflowed
from the
bottom of the
machine
Water overflow
Restart the washer
E12
Indicator or
display does
not light.
The water levelin
drum exceed a
certain level for
alarm
Power is disconnected.
PC board has problems.
Harness has connection
problem.
Check if the power is shut down
and
power plug is connected correctly.
If not, please call up service line.
Please call up service line if there are still troubles.
Please try again first, call up service line if there are still troubles
46
47
ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ • USER GUIDE
ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ • USER GUIDE