Текст страницы
ENGLISH
•
Children can use the unit ONLY under supervision of a per
son, who is responsible for their safety, and if they are given
all the necessary and understandable instructions on safety
measures and information about danger, that can be caused
by improper usage of the unit.
•
If the power cord is damaged, it should be replaced by the
manufacturer, a maintenance service or similar qualified per
sonnel to avoid danger.
•
Do not attempt to repair the unit. Do not disassemble the
unit by yourself, if any malfunction is detected or after it was
dropped, unplug the unit and apply to any authorized service
center from the contact address list given in the warranty cer
tificate and on the website www.vitek.ru.
•
To avoid damages, transport the unit in the original package only.
•
Keep the unit in a dry cool place out of reach of children and
disabled persons.
THIS UNIT IS INTENDED FOR HOUSEHOLD USE ONLY. ITS
COMMERCIAL USAGE AND USAGE IN PRODUCTION AREAS AND
WORK SPACES IS PROHIBITED.
USING THE HAIRDRYER
After unit transportation or storage at low temperature
keep it for at least three hours at room temperature before
switching on.
– Before switching the unit on, make sure that your home mains
voltage corresponds to the unit operating voltage.
– The unit is intended for operation from an AC power net
work with the frequency of 50 or 60 Hz. The unit does not
need any additional settings for operating with the required
rated frequency.
– Remove any stickers that can prevent unit operation.
– Unwind the power cord completely.
– Insert the power plug into the mains socket.
– Select the required operation mode using the switch (1):
«0» – the hairdryer is switched off;
«1» – supply of warm air at low flow speed;
«2» – supply of hot air at maximal flow speed.
Note: During the first operation some foreign smell and a
small amount of smoke from the heating element is possible,
it is normal.
– This model has a “cool” air function, use it to fix your hairstyle.
To supply “cool” air press the button (2). Press the button (2)
again to switch the hot air supply on.
– After unit operation, switch the hairdryer off by setting the
switch (1) to the position «0», and unplug it.
5