Текст страницы
ENGLISH
Nozzle
This model includes a nozzle (3). Use the nozzle when you need
to focus the drying power on a small area (for example, a curl or
a wave) or when you want to straighten wavy hair.
– Attach the nozzle (3) to the unit body. The nozzle allows direct
ing a narrow air flow of high intensity at a definite hair lock.
– Insert the power plug into the mains socket. Use the
switch (1) to set the necessary operation mode.
Overheating protection
Overheating protection switches the hairdryer off if the outgoing
air flow is too hot. If the hairdryer switches off during operation,
set the operation mode switch (1) to the “0” position, unplug the
hairdryer and make sure that the inlets and outlets are unblocked.
Let the hairdryer cool down for 5-10 minutes and switch it on
again. Do not block the air inlets during unit operation and avoid
getting of hair into its air inlet.
CLEANING AND CARE
– The hairdryer is intended for household use only.
– Set the switch (1) to the position «0» and disconnect the hair
dryer from the mains.
– You may wipe the unit body with a damp cloth and then
wipe it dry.
– Clean the air inlet grid (4) with a brush.
– Never immerse the unit into water or other liquids.
– Do not use abrasives and solvents to clean the unit body.
STORAGE
– Unplug the hairdryer if you are not using it.
– Let the hairdryer cool down after its usage, keep the unit away
from children in a dry cool place.
– Never wind the power cord around the hairdryer, as this
can damage the cord. Handle the power cord with care, do
not pull, twist or stretch it, especially near the power plug
or at the junction point. Straighten the cord periodically if it
gets twisted.
– For easy storing there is a hanging loop (6), you can hang
the unit on this loop provided that no water gets on the unit
in this position; you can fold the handle (5) to minimize the
hairdryer size.
DELIVERY SET
Hairdryer – 1 pc.
Nozzle attachment – 1 pc.
Manual – 1 pc.
6