Текст страницы
Troubleshooting
Problems
Reasons
Remedy:
Machine does not
work
∙∙Plug in, turn on the machi-
ne.
∙∙Check if the other Machines
work normally.
∙∙Power cord is not plugged
in well.
∙∙Problem from the power
supply.
∙∙Check the setting.
∙∙Prolong the heating time.
Water tempera-
ture
does not increase
∙∙Set temperature below or
close to the water tempera-
ture.
∙∙Set heating time is too
short.
∙∙Unplug the device, wait 1
min and plug it in again.
Repaired by the specialist.
∙∙Repaired by the specialist.
∙∙Program is wrong.
∙∙Temperature sensor is
invalid.
∙∙The circulator does not
rotate.
Water goes on
heating
after the set tem-
perature
is reached.
E01 appears on
the display.
∙∙Machine does not be put
into water.
∙∙Water level is too low.
∙∙Put the machine into water
and unplug the device, wait
1 min and plug it in again.
∙∙Add water, make sure the
water level is between the
MIN and MAX line.
∙∙The thermic overload is cut
off.
∙∙Machine is wrong.
Machine plugs in
and turns on, but
no display in the
LCD.
∙∙Open the plastic cover in the
front of the machine, press
“Reset” button.
∙∙Repaired by the specialist.
20