Текст страницы
DRYER MACHINE
CLEANING AND SERVICE
CLEANING THE LINT FILTER
Lint, dust, sand, wool that are removed from the laundry during drying collected in
a filter.
To clean the lint filter:
• Open the loading door.
• Remove the lint filter by pulling it up and open
the lint filter.
• Clean lint, fiber, and cotton raveling by hand or
with a soft piece of cloth.
• Close the lint filter and place it back into its
housing.
• A layer can build up on the filter pores that
can cause clogging of the filter after using the
dryer for a while. Wash the lint filter with warm water to remove the layer that builds
up on the lint filter surface. Dry the lint filter completely before reinstalling it. Clean
the entire inner surface of the loading door and loading door gasket with a soft damp
cloth.
CLEANING THE SENSOR
There are dampness sensors in the dryer that detect wheth-
er the laundry is dry.
To clean the sensors:
• Open the loading door of the dryer.
• Allow the machine to cool down if it is still hot due to the drying process.
• Wipe the metal surfaces of the sensor with a soft cloth, dampened with vinegar and
dry them.
CLEANING THE FILTER DRAWER
The hair and fibres that are not caught by the fibre filter goes to the fins of the evapo-
rator behind the toe board and accumulates here.
To clean the filter drawer
1. To open the air routing door, move the
release latch.Remove the filter drawer
cover by turning it in the direction of
arrow.
2-3.Open the filter drawer by hand.
4. Wash the filter drawer net by hand to
remove the fiber and lint on the surface.
After washing thenet,squeeze it by
hand and remove the excess water.
24
user guide