Текст страницы
Three-function Welding Machine
dangerous and must be repaired.
►Disconnect the plug from the power
source and/or the battery pack from the
power tool before making any adjust-
ments ,changing accessories, or stor-
ing power tools. Such preventive safety
measures reduce the risk of starting the
power tool accidentally.
►Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
►Maintain power tools. Check for mis-
alignment or binding of moving parts,
breakage of parts and any other con-
dition that may affect the power tool’s
operation. If damaged, have the power
tool repaired before use. Many accidents
are caused by poorly maintained power
tools.
►Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to bind
and are easier to control.
►Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to be
performed. Use of the power tool for oper-
ations different from those intended could
result in a hazardous situation.
►Keep handles and grasping surfaces
dry, clean and free from oil and grease.
Slippery handles and grasping surfaces do
not allow for safe handling and control of
the tool in unexpected situations.
Service
►Have your power tool serviced by a
qualified repair person using only iden-
tical replacement parts. This will ensure
that the safety of the power tool is main-
tained.
Safety instructions for electric
welding machine
►Be sure to make sure that the electrical
outlet that the inverter is connected to
is grounded.
►Do not touch exposed electrical parts
and electrode with exposed parts of the
body, wet gloves or clothing.
►Do not start work until you are sure that
you are insulated from the ground and
from the workpiece.
►Make sure you are in a safe position.
►Do not inhale welding fumes, they are
harmful to health.
►Adequate ventilation must be provided
in the workplace or special hoods must
be used to remove gases generated
during welding.
►Use a suitable face shield, light filter
and protective clothing to protect your
eyes and body. Clothing should be fully
buttoned so that sparks and splashes do
not fall on the body.
►Prepare a suitable face shield or curtain
to protect the viewer. To protect other
people from arc radiation and hot metals,
you must enclose the work area with a
fireproof fence.
►All walls and floors in the work area
must be protected from possible sparks
and hot metal to avoid smoldering and
fire.
►Keep flammable materials (wood, paper,
rags, etc.) away from the workplace.
►When welding, it is necessary to pro-
vide the workplace with fire extinguish-
ing means.
►IT IS FORBIDDEN:
–
Use the semiautomatic welding machine in
damp rooms or in the rain;
–
Use electrical cables with damaged insula-
tion or poor connections;
–
Carry out welding work on containers,
containers or pipes that contain liquid or
gaseous hazardous substances;
–
Carry out welding work on pressure ves-
sels;
–
Work clothing stained with oil, grease, gas-
oline and other flammable liquids.
►Use headphones or other ear protec-
tion.
►Warn bystanders that noise is harmful
to hearing.
►If problems occur during installation
and operation, please follow this in-
struction manual to check.
►If you do not fully understand the man-
ual or cannot solve the problem with
the manual, you should contact the
supplier or service center for profes-
sional help.
►The machine must be operated in dry
conditions with a humidity level not ex-
ceeding 90%.
►The ambient temperature should be be-
tween -10 and 40 degrees Celsius.
►Avoid welding in the sun or under water
3