Текст страницы
Three-function Welding Machine
droplets. Do not allow water to enter the
inside of the machine.
►Avoid welding in dusty or corrosive gas
environments.
►Avoid gas welding in a strong air flow
environment.
►A worker who has a pacemaker in-
stalled should consult a doctor before
welding. Because the electromagnetic
field can interfere with the normal opera-
tion of the pacemaker.
Product Description and Specifi-
cations
Read all safety warnings and all in-
structions.
Failure to follow the warnings and
instructions may result in electric shock, fire
and/or serious injury.
Intended Use
Semiautomatic inverter type direct current
welding machine (hereinafter referred to as
the product) is designed for welding using the
MIG / MAG methods (welding with electrode
wire in a shielded gas) and MMA (manual arc
welding with stick fusible covered electrodes).
The product can be used for welding various
types of metals.
Product features
The numbering of the components shown re-
fers to the representation of the power tool on
the graphic pages.
1. Polarity reversing cable
2. Torch connection socket
3. Power connector “+”
4. Power connector “-”
5. Fan
6. Power button
7. Connection for shielding gas
8. Power cable inlet
Technical Data
Cable with electrode holder
1pc
Cable with grounding terminal 1pc
Torch cable
1pc
Gloves
1set
Electrod weldio
10pcs
Welding mask Chameleon
1pc
Instruction manual
1pc
Note
The text and numbers of the instructions may
contain technical errors and typographical er-
rors.
Since the product is constantly being im-
proved, P.I.T. reserves the right to make
changes to the specifications and product
specifications specified here without prior no-
tice.
Preparation for work
Place the machine on a flat surface. The
workplace must be well ventilated, the weld-
ing machine must not be exposed to dust,
dirt, moisture and active steam. To ensure
adequate ventilation, the distance from the
apparatus to other objects must be at least 50
cm.
ATTENTION! To avoid electric shock, use
only electrical mains with a protective earth
conductor and grounded receptacles. DO
NOT alter the plug if it does not fit into the out-
let. Instead, a qualified electrician must install
an appropriate outlet.
Ensuring the safety of preparation
for work
Before turning on the product, set the switch
to the “0” position, and the current regulator to
the extreme left position.
Prepare for work:
–
Prepare the parts to be welded;
–
Provide adequate ventilation in the work-
place;
–
Make sure that there are no solvent
vapors, flammable, explosive and chlo-
rine-containing substances in the air;
–
Check all connections to the product; they
must be made correctly and securely;
–
Check the welding cable, if damaged it
must be replaced;
–
The power supply must be equipped with
protective systems.
If you encounter problems that you cannot
cope with, contact the service center.
Model
PMAG200-C1
Rated voltage
190-250V~ /50 Hz
Rated power
5800 W
Output current range
10-200 A
Wire diameter (MIG)
Ø 0 .8-1.0mm
Electrode diameter
(MMA)
Ø 1.6-4.0 mm
(1/16'' - 5/32'')
Electrode diameter
(TIG)
Ø 1.2/1.6/ 2.0mm
Duty cycle (DC)
25 ℃ 60%
Weight
14 kg
Contents of delivery
Three-function Welding Machine 1pc
4