Текст страницы
ENG
Comfort 3300
Wireless User’s Manual
5. CONNECTION
• Connect the 2.4 GHz USB nano receiver to a free USB port of your PC.
• To activate the set, press any button of the mouse or turn the scroll wheel. If the connection is
correct, the set will turn on automatically.
• After finishing your work, you can pull out the receiver from the PC USB port and insert it into the
mouse as shown in Fig. 4.
• If the mouse or keyboard don’t work, connect them to the nano receiver again. To reconnect the
mouse to the nano receiver, press its right button and the scroll wheel at the same time and, while
holding them, pull out and insert the 2.4 GHz nano receiver back into the USB port. To reconnect the
keyboard to the nano receiver, press its «ESC» and «K» buttons at the same time and, while holding
them, pull out and insert the 2.4 GHz nano receiver back into the USB port.
Notes:
• Do not place the receiver into a confined metal space (table drawer, box, safe), as a metal
screen does not transmit radio signals.
• If batteries run down, there are «lapses» in operation of the mouse or keyboard. In such a case
replace the batteries with new ones.
• If there is a long pause in operation of the mouse or keyboard, they enter the Sleep mode. To
enter the working mode just press any button.
Fig. 4
Fig. 5
Fig. 3. Receiver connection