Текст страницы
11
EN
STORAGE
• Insert the power plug into the mains socket and
switch the fan heater on.
• If the fan heater does not switch on, it may be caused
by another malfunction. In this case apply to a
service center for repairing of the fan heater.
PROTECTION FROM DROPPING
• After cleaning put the fan heater away for storage
in a dry cool place away from children and disabled
persons.
• Before using the fan heater next time, it is
recommended to check the unit operability and
integrity of the power cord isolation and the power
cord plug.
DELIVERY SET
• If the fan heater accidentally falls or tilts too much,
more than 45 degrees, the fall protection device will
switch on and the fan heater will be switched off.
• Set the fan heater into vertical position, and the unit
will resume operation.
Note: — place the fan-heater on a flat dry and steady
surface to prevent it from dropping.
1.
Fan heater — 1 pc.
2.
Base — 1 pc.
3.
Base fastening set – 1 pc.
4.
Remote control — 1 pc.
5.
Instruction manual — 1 pc.
CLEANING AND MAINTENANCE
TECHNICAL SPECIFICATIONS
• Power supply: 220-240 V, ~ 50 Hz
• Rated input power: 2000 W
• Heating area: 20 m²
• Remote control:
3 V — «CR2025» battery
(not included)
• Before cleaning the fan heater set make sure that the
power plug is not inserted into the mains socket.
• Wipe the fan heater body (4) with a slightly damp
cloth and then wipe it dry.
• Do not use liquid detergents, abrasive cleaners and
any solvents to clean the fan heater.
• To avoid the risk of electric shock provide that no
water or other liquid gets into the fan heater body.
• To clean the air grids, use a vacuum cleaner with a
corresponding attachment.