Текст страницы
7
EN
• Check the delivery set.
• Examine the unit for damages; if there are any
damages, do not plug it into the mains.
• Make sure that the indicated specifications of
the power supply voltage of the unit match the
specifications of your mains. If the unit is used with
a 60 Hz frequency mains, no additional steps are
required.
• Wipe the fan heater body with a slightly damp cloth
and then wipe it dry.
FAN-HEATER ASSEMBLY
• From time to time check the power cord integrity.
• If the power cord is damaged, it should be replaced
by the manufacturer, a maintenance service or
similar qualified personnel to avoid danger.
• If foreign smell or noise appears, stop using the unit
immediately.
• Do not attempt to repair the unit by yourself. Do
not disassemble the unit by yourself; in case of any
malfunction or if the unit has been dropped, unplug it
from the electrical outlet and contact a service center.
• To avoid damage, transport the unit in its original
packaging.
• Store the unit in a dry, cool place out of reach of
children and people with disabilities.
THE UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY, DO NOT USE THE UNIT FOR COMMERCIAL
OR LABORATORY PURPOSES.
BEFORE THE FIRST USE
After transporting or storing the device at sub-zero
temperatures, unpack it and wait 3 hours before
use.
• The fan heater is supplied with a disassembled base
(1). Do not switch on the fan-heater without the base
(1).
• Remove the base (1) halves from the packaging and
align them so that the locks are triggered (Fig. 1).
• Pass the power cable through the opening in the base
(1) halves (Fig. 2).
• Take out the mounting screws from the packaging,
insert them into the openings in the base (1) and
tighten them using a screwdriver (not included)
(Fig. 3).
• Make sure that the base (1) is properly secured.
USING THE FAN HEATER
• Unpack the unit and remove all the packaging
materials.
• Keep the original packaging.
• Read the safety measures and operating
recommendations.
• Use the handle (5) to carry the fan heater.
• Place the fan base (1) on a flat, dry, and steady
surface.