Текст страницы
Optional Accessories
About This Guide
- PoE Injector (Model: DPE-301GI)
ENGLISH
Note: These accessories are not included
in the package. If any of these items are
required, please contact your reseller to
order it.
This installation guide provides basic
instructions for installing the DWL-7620AP
Unified AC Tri Band PoE Access Point on
your network. For additional information
about how to use the access point, please
see the User Manual, which is available
on the CD included in this package or from
the D-Link support website.
Hardware Overview
LEDs
System Requirements
- CD-ROM drive
- Windows®, Macintosh®, or Linux-based
operating system
- An available Ethernet port
- Internet Explorer 11, Safari 7, Firefox 28,
Google Chrome 33 or higher
Unpacking the Product
Figure 1. DWL-7620AP LEDs
Open the shipping carton and carefully
unpack its contents. Please consult the
packing list below to make sure all items
are present and undamaged. If any item is
missing or damaged, please contact your
local D-Link reseller for replacement.
POWER
When this LED is red,
the access point is
booting up. When it is
green, it is ready for use.
LAN1/LAN2 When this LED is lit, the
- DWL-7620AP
- Mounting ring
- Console cable*
- CD-ROM
- Ceiling bracket (3 sets, sizes are 9/16",
14/16", and 1 1/2")
device’s Ethernet port is
connected to an active
router or switch. The
light will flash when data
is being transmitted
through the port.
2.4GHz/5GHz When the LED is lit, the
access point’s wireless
radio is enabled. It will
flash when data is being
transmitted via wireless.
*The console cable is an optional
accessory and not included in the
package in Armenia, Azerbaijan, Belarus,
Georgia, Israel, Kaliningrad, Kazakhstan,
Kyrgyzstan, Latvia, Lithuania, Moldova,
Mongolia, Russia, Turkey, Turkmenistan,
Ukraine, and Uzbekistan. If a cable is
required, please contact your reseller to
order it (Model: ACS-AP-CONSOLE).
2
D-Link DWL-7620AP Quick Install Guide