Текст страницы
16 Reel cover
17 Reel cover release
Scope of delivery
The scope of delivery for the appliance is shown on the
packaging. Check the contents for completeness when
unpacking. If any accessories are missing or in the
event of any shipping damage, please notify your deal-
er.
18 Cutting tool
a) String reel
b) Trimmer blade
19 Eye
Symbols on the device
20 Button for releasing the string
21 *Rechargeable battery pack
Follow all warning notices and safety instruc-
tions. Read and comprehend all instructions
before using the product.
22 *Charger
23 Type plate
Always wear suitable eye protection and
hearing protection when working with the de-
vice.
* optional
Do not subject the device to rain or moist
conditions.
Rechargeable battery pack
The device can be operated with a Kärcher 18 V Bat-
tery Power battery pack.
Do not use saw blades or metal blades.
Installation
Danger due to flung objects. Keep a safe dis-
tance away.
Hand injuries from sharp cutting tool.
Installing the string guard
WARNING
Blade on the string guard
Incision injuries
Install the string guard before using the device for the
first time.
WARNING
Exposed string
Incision injuries
Never use the device without the string guard.
Illustration B
The string guard must face the operator.
1. Insert the string guard into the bracket.
2. Screw the string guard to the bracket.
Mounting the string reel
When assembling the components, make sure that the
side recesses match.
1. Assemble the sprocket.
Description of the device
The maximum amount of equipment is described in
these operating instructions. Depending on the model
used, there are differences in the scope of delivery (see
packaging).
For the illustrations, refer to the graphics page
Illustration A
2. Mount the string guard cover.
3. Insert a tool (e.g. screwdriver) through the recesses
on the side to prevent the support from rotating.
1
Rear handle
2
Unlocking button
4. Mount the string reel.
3
Battery pack release
4
Power switch
5
Front handle
Installing the front handle
1. Screw the front handle to the upper shaft section at
the desired height.
Illustration C
6
Handle screw
Initial startup
7
Upper shaft
8
Telescoping collar
9
Twist collar
10 Lower shaft
Adjusting shaft length
1. Release the telescoping collar counterclockwise.
Illustration D
2. Pull out the upper shaft until the desired length is
reached.
3. Tighten the telescoping collar clockwise.
11 Pivoting head
12 Plant guard bracket
13 String guard
14 Cutting edge
Adjusting the string length
1. Press the button for releasing the string and pull the
string out of the string reel and up to the cutting
edge. If necessary, press the button several times.
Illustration E
15 Cutting string
20
English