Текст страницы
Symbol
Meaning
may result in cancer, congenital deficiency or be
harmful to the fertility. The ion of some chemical sub
stances shall be:
•• Before any repair and replacement work to the
machine, the power plug must be pulled out firstly.
Movement direction.
Rotation direction.
Locked.
Unlocked.
Prohibited.
•• The transparent two silicon oxide and other masonry
products in the wall bricks and cement; the chromium
arsenic (CCA) in wood with chemical treatment. The
harm degree of these substances shall depend on
the frequent degree of you carrying out these works.
If you want to reduce the contact with these chemical
substances, please work in the place with ventilation
and you shall use the appliances with safety certificates
(such as the dust mask designed with tiny dust filter).
Notice the power voltage: in power connection, you
must confirm that if the power voltage is the same
to the voltage marked in the tool's data plate. If the
power voltage is higher than the appropriate voltage,
the accidents will be resulted to the operators, and at
the same time, the tool will be destroyed. Therefore, if
the power voltage has not been confirmed, then you
shall never plug in arbitrarily. On the contrary, when
the power voltage is lower than the required voltage,
the motor will be damaged.
Double insulation / protec
tion class.
Symbols used in the manual
Attention. Important.
Following symbols are used in the operation manual,
please remember their meanings. Correct interpreta
tion of the symbols will allow correct and safe use of
the power tool.
Useful information.
Symbol
Meaning
Wear protective gloves.
Serial number sticker:
CT ... - model;
XX - date of manufacture;
XXXXXXX - serial number.
Possibility to select between
two positions of additional
handle.
Do not dispose of the power
tool in a domestic waste
container.
Power tool designation
Read all safety regulations
and instructions.
Wear safety goggles.
The power tool is intended for dry cutting, grinding and
sanding of metals (and other materials).
The area of the tool application can be expanded due
to use of additional accessories.
There is a possibility of a stationary installation of the
power tool by use of some special accessories.
Wear ear protectors.
Power tool components
Wear a dust mask.
Disconnect the power tool
from the mains before instal
lation or adjustment.
1 Reducer
2 Spindle lock
3 Ventilation slots
4 Protective casing
5 Additional handle
6 On / off switch
7 Body
8 Flange wrench *
23
English