Текст страницы
1. Power On
Plug the extender into a power outlet next to your router. Wait until
its Signal LED turns solid on.
Note: For safety, only plug the extender in the direction as shown below.
Quick Installation Guide
© 2021 MERCUSYS 7107500161 REV3.0.0
Range Extender
Next to
Solid on
Router
Extender
* Images are for demonstration only.
2. Set Up
Method 1: Via a Web Browser
Method 2: Via the WPS Button
1. Connect your wireless device to the extender (MERCUSYS_RE_XXXX).
1. Press the WPS button on your router.
Note: The default SSID (network name) is printed on the product label at the back of the extender.
2. Within 2 minutes, press the WPS or RESET/WPS button on the
extender for 1 second.
2. Launch a web browser and visit http://mwlogin.net. Create a
password to log in.
3. Follow web instructions to complete the setup.
The Signal LED should change from blinking to solid green or orange,
indicating a successful connection to your router.
Note: If the LED does not turn solid green or orange, try again or use Method 1.
The Signal LED should turn solid green or orange, indicating a
successful connection to your router.
Extended Network Name(s):
Same as your router or with EXT at the end
Password(s):
Same as your router
Solid
green/orange
Solid
green/orange
3. Relocate
Solid green: Suitable location
Solid orange: Too far from router
Solid red: Not connected to router
1. Plug in the extender about halfway between your router and the Wi-Fi dead
zone. The location you choose must be within the range of your router.
Host Network
Extended Network
2. Wait for about 2 minutes until the Signal LED turns solid green. If it doesn't,
relocate the extender closer to the router to achieve better signal quality.
Router
Extender
Devices
Enjoy!
Connect your device to the extender using the extended network
name(s). The extender shares the same Wi-Fi password(s) as your router.