Текст страницы
I
Power on the extender/repeater
English
II
Plug the extender/repeater into a power outlet near the Wi-Fi router.
For the device with single LED indicator: Wait until the LED indicator blinks red.
For the device with multiple LED indicators: Ensure that the PWR LED indicator is solid on.
Connect the extender/repeater to the internet
Method 1: Set up the extender/repeater by web UI
1. Connect the client to the extender/repeater.
Method 1: Connect the WiFi-enabled device such as a smartphone to the Wi-Fi network of extender/repeater.
Method 2: If the extender/repeater has a LAN port, use an Ethernet cable to connect the computer to the LAN port of the
extender/repeater.
The default Wi-Fi name (SSID) is labeled on your extender/repeater. By default, it has no password.
Tips
2. After connecting to the extender/repeater, within one minute, you will be directed to the quick setup page. If not, start a web
browser, and enter re.tenda.cn or 192.168.0.254 in the address bar to access the extender/repeater’s web UI.
3. Follow the onscreen instructions to complete the setup.
Tips
- If the web UI still does not appear, refer to Q1 in FAQ.
- If the web UI prompts to select a working mode, select Extender Mode.
Method 2: Set up the extender/repeater by WPS button
Tips
This method is applicable for the router having a WPS button. If the extender/repeater supports the MESH function, this method is also
applicable to a Tenda router that supports Wi-Fi+Mesh technology.
02