Текст страницы
English
1. Press the WPS button on the Wi-Fi router to enable its WPS function.
2. Within 2 minutes, press the WPS button (1-3s) on the extender/repeater.
For the device with single LED indicator: The LED indicator blinks fast. When the LED indicator lights solid blue or green,
the setup is successful.
For the device with multiple LED indicators: The WPS LED indicator blinks. When the WPS LED indicator lights solid on,
and the Signal LED indicator lights solid blue, the setup is successful.
III Relocate the extender/repeater
1. Refer to the following relocation tips to locate the extender/repeater to obtain a better performance.
- Place the extender/repeater between the Wi-Fi router and the Wi-Fi dead zone (within the coverage of the router).
- Keep your extender/repeater away from electronics with strong interference, such as microwave ovens, induction
cookers, and refrigerators.
- Place the extender/repeater in a high position with few obstacles.
- Unfold the antennas and point them vertically upwards.
2. Observe the (Signal) LED indicator of the extender/repeater to ensure the extender/ repeater is located in the proper
position.
Device: LED indicator
Good connection quality
Fair connection quality
Poor connection quality
Solid yellow
Solid orange Or Solid red
Solid green or blue
For the device with single
LED indicator: LED indicator
For the device with multiple
Solid blue
Solid red
LED indicators: Signal LED
indicator
3. If the connection quality is fair/poor, move the extender/repeater closer to the Wi-Fi router.
03