Текст страницы
Power On
Plug the extender into a power outlet next to your router. Wait until
its Power LED turns solid on after blinking for a while.
Note: For safety, only plug the extender in the direction as shown below.
©2025 TP-Link 7106512104 REV1.1.0
Quick Installation Guide
Range Extender
Next to
Solid On
Setup with videos
Scan the QR code, or visit
https://www.tp-link.com/support/setup-video/#range-extenders
and search for the setup video of your model.
Router
* Images may differ from your actual product.
Set Up
Method 2: Via the Tether App
1. Get the up-to-date Tether app from the Apple App
Store or Google Play, or simply scan the QR code.
Method 3: Via a Web Browser
1. Connect your computer or smartphone to
the extender’s network TP-Link_Extender.
Method 1: Via the WPS Button
1. Activate the WPS function on your router by
pressing the WPS button.
Note: If you don’t know how to do, refer to your router’s
user manual, or you can use other methods to set it up.
TP-Link_Extender
The WPS button might
look like one of these:
or
Scan for Tether
Tether
2. Launch the Tether app and log in with your TP-Link
ID. If you don’t have an account, create one first.
3. Tap the button and select Range Extender.
2. Visit http://www.tplinkrepeater.net or
http://192.168.0.254 in a web browser.
Create a password to log in.
Notes:
1. If you cannot find your device, please refer to FAQ > Q1.
2. Due to Tether app updates, your actual user interface
and pathway may differ from those depicted here.
2. Within 2 minutes, press the WPS button on the
extender for 1 second, and the LED starts
blinking. Wait for the LED, 2.4GHz LED, and
5GHz LED to turn solid blue, indicating a
successful connection.
Note: lf only the 2.4GHz or 5GHz LED is solid blue, check to
see if the router has both 2.4GHz and 5GHz turned on. If
both are turned on, try WPS again or use other methods.
http://www.tplinkrepeater.net
My Devices
Create Password
Low
Middle
High
No devices found.
Confirm Password
Start
Choose Your Device Type
Wireless Router
Gaming Router
3. Follow web instructions to complete the setup.
Range Extender
3. Done. You can connect to the extender’s Wi-Fi.
4. Follow app instructions to complete the setup.
The LED should turn solid on, indicating
successful connection to your router.
Note: If the LED does not turn solid on, please refer
to FAQ > Q2.
Solid On
Extended Network Names:
Router’s network name with _EXT at the end
or
Same as your EasyMesh router (see back for EasyMesh
details)
Passwords:
Same as your router
Relocate
Blue: Suitable location
Red: Too far from router
1. Plug in the extender about halfway between your router and the Wi-Fi dead zone. The
location you choose must be within the range of your router.
2. Wait for about 2 minutes until the LED turns solid blue. If it doesn't, relocate the
extender closer to the router to achieve better signal quality.
Router
Devices
Halfway
Tip: To place the extender for optimal Wi-Fi performance, access extender settings via the
Tether app and go to find Location Assistant, or simply scan the QR code to visit
https://www.tp-link.com/support/faq/3103/.
Enjoy!
Laptop
Smartphone
Tablet
· Connect your devices to the extender wirelessly or via an Ethernet cable, then enjoy the
internet. The passwords of your extended networks are the same as your main router.
· You can access extender settings via the Tether app or a web browser.
Router
Smart TV
Game Console
Desktop
Connect to 2.5Gbps
Ethernet Port
· You can also change the extender to Access Point Mode to transform your existing wired
network to a wireless one. For details, see Access Point Mode (AP Mode) on the back page.