Текст страницы
LED Explanation
Access Point Mode (AP Mode)
LED
Status
Indication (For Range Extender Mode)
Access Point mode will transform your existing wired network to a wireless network.
We recommend that you use Access Point mode when your wireless devices need
to access to a wired network.
(Power)
The extender is on or off.
The system is starting up or firmware upgrade is in progress.
On/Off
Blinking
Solid blue
Smartphone
Solid red
(Signal)
The extender is connected to your router’s wireless
network and is in a suitable location.
The extender is receiving a weak signal. Try relocating it
closer to your router.
WPS connection is in progress.
No wireless connection is established.
Blinking
Off
Tablet
Connect to 2.5Gbps
Ethernet Port
The extender is connected or not connected to the 2.4 GHz
wireless network of your router.
2.4 GHz
On/Off
Router
The extender is connected or not connected to the 5 GHz
wireless network of your router.
5 GHz
On/Off
Laptop
EasyMesh-Compatible
Stable wireless performance and wired connection with a main router required.
To change your extender to Access Point Mode, do the following:
You can experience strong, stable, and seamless wireless connections
throughout your home with EasyMesh, a whole home mesh standard that
works across different access points for ultimate flexibility.
a. By Web: Login → Find the Change Mode button on top.
For details, refer to the user guide at https://www.tp-link.com/support.
Seamless Roaming
Connects mobile devices to your routers or extenders that provide the best coverage. Devices
compatible with EasyMesh also share a single Wi-Fi name so you stay connected in every room.
English
A
TP-Link ID
Change Mode
Log Out
One-Click Settings
Press the WPS button on the main router and the extender within 2 minutes of each other,
then the EasyMesh network will set up.
b. By Tether: Login to your extender → Find the Operation Mode
Note: Due to Tether app updates, images may differ from your actual user interface.
Flexible Scalability
Flexibly scale your home networking with different vendors,* different topologies, different
Protocols and different product categories.
Operation Mode
*TP-Link EasyMesh-compatible products can network with other devices that use EasyMesh. Failed connections
may be due to firmware conflicts of different vendors. The EasyMesh-Compatible function is still being developed
on some models and will be supported in subsequent software updates.
This product is compatible with standardized EasyMesh technology but has not obtained the Wi-Fi EasyMeshTM
certification.
Network
More
Scan for Setup Video
For more information, visit
https://www.tp-link.com/easymesh/.
Q3. How do I reset the extender?
• With the extender powered on, use a pin to press the Reset button for 1 second. The
extender will reboot.
Q1. What should I do if the Tether app cannot find my device during setup?
• Try another method by following the steps below:
1. Connect your smartphone to the extender’s network TP-Link_Extender.
< Settings
Wi-Fi
Wi-Fi
CHOOSE A NETWORK...
TP-Link_Extender
Reset
2. Launch the Tether app, and select your extender.
Tip: If you have connected to the extender’s Wi-Fi but still cannot find your device, try turning off
your cellular data.
If you need more setup help, please visit
https://www.tp-link.com/support/faq/3074/, or simply scan the QR code.
My Devices
Local Device
Safety Information
RExxx
XX-XX-XX-XX-XX-XX
3. Follow app instructions to complete the setup.
If you are still having problems, contact our technical support.
• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
• Do not use the device where wireless devices are not allowed.
• If the product has a 3-pin plug, plug the product into the wall outlets with earthing connection through
the plug.
Please read and follow the above safety information when operating the device. We cannot
guarantee that no accidents or damage will occur due to improper use of the device. Please use this
product with care and operate at your own risk.
Q2. What should I do if the LED doesn’t turn solid on after completing
setup via the Tether app or web browser?
• You may have entered incorrect Wi-Fi password for your main router during the
configuration. Check the password and try again.
• Make sure the extender is close to your router, preferably within 16 feet, and away from
large electrical appliances.
TP-Link hereby declares that the device is in compliance with the essential requirements and other
relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011 /65/EU and (EU) 2015/863.
The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce
TP-Link hereby declares that the device is in compliance with the essential requirements and other
relevant provisions of the Radio Equipment Regulations 2017.
The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca
• If you have enabled wireless MAC filtering, wireless access control, or access control list
(ACL) on your router, disable them first, then follow any method on the front page to
complete the configuration.
• Try setting it up via the WPS button.
• Reset the extender and go through the configuration again.
If you are still having problems, contact our technical support.
For technical support, replacement services, user manuals and other
information, please visit https://www.tp-link.com/support, or simply scan the
QR code.
BE3600 Wi-Fi 7 Range Extender (RE235BE)