Текст страницы
Instruction Manual
Other connections
Volume control
Input connections
• This amplifier is equipped
with RCA connectors for low level inputs. The
low level signal is transmitted over RCA
cables. It is preferable to use the amplifier's
low-level inputs if the head unit
(radio) is equipped with low-level outputs.
• First, set the volume
control on the amplifier to min. After turning on
the radio for the first time, set the volume
control of the radio to about 80% of full power.
Start playing the sound and slowly turn up the
volume of the amp until you hear distortion,
then turn the volume down for a cleaner
sound.
Speaker output connections
• You do not need to set up
the amplifier input connection before
connecting the speaker outputs.
• Connect the right and left
speaker wires to the corresponding
speaker output terminals on the amplifier.
• Make sure the positive
wire from the speaker is connected to the
positive terminal of the amplifier and the
negative wire to the negative terminal.
Reversing either of these connections will
move the speaker cones out of phase,
resulting in bass suppression.
5