Текст страницы
6
EN
• Clean the iron body and the soleplate with a soft,
slightly damp cloth and then wipe it dry.
OPTIONS OF USING THE IRON
• To avoid damages, transport the unit in the original
package.
• Keep the unit in a dry cool place out of reach of
children and disabled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY, DO NOT USE THE UNIT FOR COMMERCIAL
OR LABORATORY PURPOSES.
BEFORE THE FIRST USE
After the unit’s transportation or storage at negative
temperature, unpack it and wait for at least 3 hours
before using.
• You can use the iron both with the power cord and
wirelessly.
• For the power cord option, do not remove the base
(10), but set the latch (8) to position «
».
• To use the wireless option, place the base (9) on a
flat, stable surface, taking care to keep the power
cord away from hot surfaces and sharp edges of
furniture.
• Set the latch (8) to position «
».
• Fill the iron reservoir (11) with water (see the
recommendations in the «SELECTING WATER»
section).
• Use the regulator (13) to set the desired iron
soleplate temperature (12) (see «IRONING
TEMPERATURE»).
• Place the iron on detachable base (10).
• Insert the power plug into the mains socket, the
indicator (6) will light up.
• When the indicator (6) goes out, you can start using
the iron.
Note:
-
The possible use time of the iron in the wireless
variant from 20 to 30 seconds, it would seem that
this is not much, but in practice this time is enough
• Unpack the iron and remove any packaging materials
and advertising stickers.
• If there is a protective film on the soleplate (11),
remove it.
• There may be water residue in the tank (10), as the
iron has undergone factory quality control.
• Keep the original package.
• Read the safety measures and operating
recommendations.
• Check the delivery set.
• Examine the unit for damages, in case of damage do
not plug it into the mains.
• Make sure that specified specifications of power
supply voltage of the unit correspond to the
specifications of your mains. When using the unit in
the mains with 60 Hz frequency, the unit does not
need any additional settings.