Текст страницы
7
EN
-
if you need to refill the water tank during ironing,
switch the iron off and remove the power plug from
the mains socket.
IRONING TEMPERATURE
until the next cycle of the iron soleplate heating
(12), when placing the iron on the removable base
(10).
-
when the unit is switched on for the first time a
foreign smell can appear - it is normal and is not
covered by warranty.
WATER SELECTION
Before using the iron for the first time test the heated
iron on a piece of cloth to be sure that the iron soleplate
(12) and the water tank (11) are clean.
• Before ironing check the recommended ironing
temperature indicated on the tag.
• Use tap water to fill the water tank (11) of the iron.
• If tap water is hard, it is recommended to mix it with
distilled water in proportion 1:1. If tap water is too
hard, mix it with distilled water in proportion 1:2 or
use distilled water only.
FILLING THE WATER TANK
• If the item label is marked with the symbol «
»,
do not iron the item.
• If there is no label on the clothes item, but you know
the type of fabric, refer to the following table to
determine the proper temperature.
ATTENTION!
Обозначения
Тип ткани (температура)
Before filling the water tank (11) with water make sure
that the iron is switched off and unplugged.
do not iron
•
Synthetics, nylon, acryl, polyester (low
temperature)
••
Silk/wool (medium temperature)
• Set the temperature control knob (13) to the position
«MIN», and the continuous steam supply knob (3) to
the position «
».
• Open the water inlet lid (2).
• Pour the water into the water tank using the beaker
(11) and then close the lid (2).
•••
Cotton (high temperature)
Notes:
MAX
Linen (high temperature)
-
do not let water go over the «МАХ» mark when
filling the water tank (11);
• This table is only valid for smooth materials.
• Fabrics of other types (crimped, raised, etc.) are best
ironed at low temperature.