Текст страницы
indicator lamp signals the heating of the iron. Turning off the lamp indicates
that the iron has reached the set temperature and You can start ironing.
FUNCTIONS
SPRAYER
To spray water on the fabric, press the «Spray» button.
- APPLIANCE DESCRIPTION
- Sprayer
- Filler neck
- Steam/self-cleaning switch
- Spray button
- Steam shock button
- Mode controller
- Ceramic-coated sole
- Indicator
DRY IRONING/STEAM
To turn on the steam supply, move the steam supply switch to position
«
». To turn off steam (dry ironing), move the steam switch to position «0».
STEAM STROKE
To use the steam shock function (powerful one-time steam emission), press
the «Steam Shock» button.
- COMPLETENESS
- Iron - 1 pc.
- Measuring cup - 1 pc.
- User manual - 1 pc.
ATTENTION! Use the «Steam blow» button only after the iron is heated to
the steam production temperature. Do not press the steam shock button
more than three times in a row.
4. Disconnect the iron from the electric power grid before filling the
water tank.
5. If the power cable should be damaged, have it replaced by the
Manufacturer, authorized service centre or similar skilled personnel
to avoid dangerous situations.
6. Do not use the appliance if the power cable or plug is damaged.
7. Do not submerge the appliance in water.
8. Do not allow the power cable to contact the hot sole of the appliance.
9. Prior to putting the appliance away for storage let it cool down
completely.
10. Use and store the appliance on a stable surface.
11. Do not operate the appliance if it has been dropped, has visible damage
or leaks water.
12. Do not connect the appliance to power supply via a timer or other
remote control device.
13. The surface of the heating element will remain hot for some time after
the appliance is turned off.
14. Accessible surfaces of the appliance can become very hot during
operation.
15. Special instructions for transportation (shipment) and sale: none.
16. If you wish to transfer the device for use by another person, please
transfer it along with these instructions.
THERMAL FUSE
If the iron’s thermostat fails, the appliance will automatically turn off to
prevent overheating. In this case, you should contact customer service.
4. WORKING PROCEDURE
Remove the protective film/cardboard from the sole of the iron. The steam
iron can use ordinary tap water. If the hardness of tap water exceeds 17° dH,
it is necessary to use distilled or demineralized (filtered) water to increase
the service life of the iron. Fill the water tank (for steam ironing). Disconnect
the iron from the mains and set the steam supply switch to the «0» position.
Fill in the water so that its level is visible approximately in the middle of
the transparent part of the iron body. Plug the iron into an electrical outlet.
ANTI-DRIP FUNCTION
This system constantly controls the water supply to the sole. When a certain
temperature is reached, the anti-drip function shuts off the water supply
and prevents dripping from the iron onto the fabric.
TEMPERATURE CONTROL
Sort the laundry according to the composition of the fabrics and the
appropriate ironing temperature. Iron products that require a lower
temperature first, since the iron heats up faster than it cools down. The
ATTENTION! Before first use, try the iron out on a useless piece of fabric to
ensure that the sole or the water tank is not contaminated. Some parts
of the appliance are slightly lubricated during assembly; therefore some
smoke can occur when the iron is turned on for the first time. This should
disappear within a few seconds.
10