Текст страницы
ATTENTION! When ironing, water may flow through the sole of the iron. This
happens if the («МИН.» - «••») temperature is too low. If this happens, turn
the temperature control to the «••» position. Once the newly selected
temperature is reached, the water flow will decrease significantly. We
draw your attention to the fact that a slight flow of water through the sole
of the iron is permissible and is not a defect.
5. CARE OF THE DEVICE
Set the temperature controller to the OFF position and disconnect the
iron from the mains. Place the iron in an upright position and let it cool
completely. Drain the water from the iron container. Set the steam supply
regulator to the «0» position. Remove deposits from the sole of the iron with
a solution of acetic acid. Wipe the iron body with a damp cloth, then wipe dry.
9. Set the steam switch to self-cleaning position «
». Boiling water and
steam will now come out of the holes in the sole.
10. Shake the iron gently. Continue releasing steam and water until the
water tank is almost empty. Move the steam supply switch to position
«0».
11. Connect the iron to the mains.
12. Set the temperature control to the «МАКС.» position, allow the iron
to heat up again, the remaining water inside the steam chamber will
evaporate and exit the iron through the soleplate.
13. Unplug the iron. Let cool completely. Wipe the soleplate of the iron
with a dry cloth.
During the dry steaming process, it is recommended to use it over an old
piece of cloth.
SELF CLEANING FUNCTION
8. CERTIFICATION DATA, GUARANTEE
The service life of this item is 5 years since the date of sale to the end
user, provided the item will be used in strict accordance with the present
manual and the applicable technical standards. Upon expiry of the service
life please contact the nearest authorized service centre for suggestions
as to further operation of the appliance. The manufacturing date of the
appliance is integrated into the serial number (digits 2 and 3 - year, digits
4 and 5 - month of manufacture). If any questions related to appliance
maintenance should arise, or if the appliance has malfunctions, apply to the
CENTEK TM Authorized Service Center. The address of the service center can
be found on the website https://centek.ru/servis. Service support contacts:
Phone: +7 (988) 24-00-178, VK: vk.com/centek_krd. General Service Center:
OOO «Larina-Servis», Krasnodar, Phone: +7 (861) 991-05-42.
The product has the Certificate of Conformity No.:
ЕАЭС RU С-CN.АЖ49.В.03673/24 of 18.03.2024.
NOTE: Your iron will provide the best ironing results and last longer if you use
the self-cleaning function once a month or more often depending on usage.
- SPECIFICATIONS
- Nominal rated voltage: 220-240 V ~50/60 Hz
- Nominal power rating: 2350-2800 W
- Water tank: 600 ml
9. INFORMATION ABOUT THE MANUFACTURER, IMPORTER
I mported to EAEU by: Individualniy Predprinimatel Asrumyan Karo
Shurikovich. Address: Russia, 350912 Krasnodar, ul. Atamana Lysenko,
23, pgt. Pashkovskiy, phone: +7
CAREFUL: accessible surfaces of the appliance can reach high temperature
during operation. Do not touch the hot surfaces.
(861) 2-600-900.
7. DISPOSAL
Upon expiry of its service life the appliance can be disposed of separately
from ordinary domestic waste. You can turn it over to a specialized electric
and electronic appliance disposal and recycling centre.
- Fill the reservoir halfway with water.
- Place the iron in a vertical position.
- Set the mode dial to the «МАКС.» position.
- Turn the steam adjustment knob to position «0».
- Connect the iron to the mains.
- Let the iron heat up until the light goes out.
- Unplug the iron.
- Hold the iron horizontally over the sink.
DEAR CONSUMER!
The guarantee period for all appliances amounts to 12 months from the
date of sale to the end consumer. With this Warranty Card the Manufacturer
confirms the proper condition of the appliance and undertakes to repair, free
of charge, all defects caused by the Manufacturer’s default.
11