Текст страницы
IM2022
Do not fill higher than mark on the water tank, in order to avoid water spilling.
The opening which is used for pouring water should be closed when the iron is in
use.
Always unplug the iron from the power socket when refilling the water reservoir.
NOTE:
Your steam iron is designed to use tap water. However, if the water is very
hard, it is advisable to use distilled water.
Do not use chemically de-limed or perfumed water.
If you have too hard water, it is advisable to use only distilled or demineralized
water.
The water tank should be emptied after each use.
ATTENTION: After draining the water from the cooled iron, place it vertically (on the
heel) and turn it on for 2 minutes in the maximum heat mode, then unplug the iron from
the mains.
SPRAYING
As long as there is enough water in the water tank, you may use the spray button at
any temperature setting during steam or dry ironing.
Press the spray button several times to activate the pump while you are ironing.
STEAM IRONING
With the unit unplugged, fill the steam iron with water.
Stand the steam iron on its heel rest in an upright position on an iron-safe surface
and plug in.
Set the temperature control dial to the “••“ or “•••” position.
When the indicator light is off, the steam iron has reached desired temperature.
Set the variable steam control to the desired position
,
.
When finished, turn the temperature dial counterclockwise to the minimum position
and unplug the appliance from the power supply.
CAUTION: Avoid coming in contact with ejected steam.
DRY IRONING
The steam iron can be used on the dry setting with or without water in the water tank,
however it is best to avoid having the water tank full while dry ironing.
Turn the variable steam control to the minimum position
.
CAUTION:
If the steam iron has been used for a long time, it is hot and there is no water. Do not
refill it with water until the steam iron cools down.
16