Текст страницы
IM2022
BURST OF STEAM
The burst of steam feature provides additional steam for removing stubborn wrinkles.
Press the powerful steam button to release the burst of steam.
NOTE:
To prevent water leakage from the soleplate, do not keep the powerful steam
button pressed for more than 5 seconds.
For the best steam quality, do not use more than three successive bursts each
time, because the iron will cool.
VERTICAL STEAM
Ensure that there is enough water in the water tank.
Stand the steam iron on its heel rest on an iron-safe surface and plug it.
Set the temperature control dial and variable steam control to their maximum
positions.
Hold the iron vertically and press the steam burst button, an intense steam will be
ejected from the soleplate.
WHEN YOU FINISHED IRONING
Set the temperature dial to the minimum position.
Remove the mains plug from the wall socket.
10. CARE AND CLEANING
Before cleaning the steam iron ensure it is unplugged from the power supply and has
completely cooled down.
Do not use abrasive cleaners.
SELF-CLEANING
Fill water reservoir up to the maximum level and then close it.
Set the temperature control to its maximum position.
Insert the main plug into the wall socket.
Allow the iron to heat up until the indicator light goes out.
Holding the iron horizontally over the sink then change the steam control to the
maximum position
and press the self-cleaning button.
Boiling water and steam will be ejected from the holes in soleplate with Impurities
washed out. Rock the iron forwards and backwards during this operation.
Repeat self-cleaning if you notice that much impurity has been washed out.
Move the iron over an old (preferably) piece of cloth. This to ensure that the soleplate
will be dry during storage.
11. STORAGE
17