Текст страницы
•
Dimmed mode (press once)
•
Lights-out mode (press twice)
•
By pressing the dimmer button once more, you can go back into nor-
mal mode.
If there is no water in the device, “NO” appears on the display (12) in all
modes. The display cannot be turned off.
7. Press the Wi-Fi button (10) for 3 seconds to connect Noah / Noah Pro to
the “Stadler Form” App (available in the App Store and via Google Play)
on your smartphone. If the device is in pairing mode, the Wi-Fi symbol on
the display (12) flashes. A constantly displayed Wi-Fi symbol on the dis-
play (12) indicates that there is an existing connection between Noah /
Noah Pro and your smartphone. If no connection is established between
the appliance and the smartphone within 1 minute of pairing mode, the
Wi-Fi switches off and the symbol disappears from the display. The Wi-
Fi function must then be reactivated. You can control all the functions of
the appliance via the app and monitor the air quality in real time, even
when you are not at home. More detailed information on connecting the
device to your smartphone can be found in the enclosed “Wi-Fi– Quick
Setup Guide” or on our website: www.stadlerform.com/connect.
8. Noah / Noah Pro has a reminder function for filter change. At first use
timer will be set automatically. After a whole operating duration of 60
days the filters must be changed. In this case, “00” and the current
measured humidity will appear alternately on the display (12) for 3 sec-
onds each. Press the reset button (11) for 3 seconds. The reminder func-
tion will be reset and “00” will no longer be displayed.
9. The current water level is shown on the display (13) by bars (8 bars =
100 %, 6 bars = 75 %, 4 bars = 50 % und 2 bars = 25 %). If the water con-
tainer (14) is empty, the device switches off automatically and “NO” ap-
pears on the display (12). Lift off the upper part (3) of the device to fill the
lower part (14) at the tap to the maximum mark (18) with clean, cold tap
water. Alternatively, you can fill the lower part (14) with a clean water-
ing can through the filling opening (17). The appliance resumes operation
after a few seconds. If you want to top up the water during operation,
you can open the filling opening (17) by pressing it in the lower area. The
light (19) for better visibility of the maximum mark (18) is then switched
on. Now fill the water container (14) up to the maximum mark (18) using
a clean watering can or water bottle. The lighting goes out automatically
as soon as the filling opening (17) is closed.
10. You can use Noah / Noah Pro to disperse fragrances in the room. Be
extremely sparing with fragrances because an excessive dosage can
result in the malfunctioning of, and damage to, the appliance. In order to
use fragrances, lift off the upper part (3) from the device and remove the
fragrance container (16). Let the fragrance drip directly onto the cotton
pad in the fragrance container (16). Add a maximum of 1–2 drops of
fragrance into the fragrance container. Then put the fragrance container
back in place and then the upper part (3) back on the lower part (14). Tip:
in order to change the fragrance, remove the cotton pad and clean the
container with soap. Now you may insert a new cotton pad (commer-
cially available) and add drops of the desired fragrance. Caution, do not
allow any fragrances to enter the water container. These will damage
the plastic and cause the appliance to malfunction. Appliances that are
damaged by such additives are excluded from the warranty.