Инструкция IP-камера Tiandy TC-C32WS I5W/E/Y/S/2.8mm/V5.0

UPnP interface

Only when port mapping is enabled, can the ports of network devices be opened normally. Port

mapping methods include automatic and manual.

(1) When "Auto" mode is selected and UPnP is enabled, users do not need to do port mapping on

the router, only need to turn on the UPnP function on the router.

(2) Select "Manual", the user needs to manually map the port on the router. In manual mode, the

user can specify the external port to be mapped under the public IP. The user does not need to

modify the port of the network device itself. If the router or gateway does not support the UPnP

function, the user can fill in the current mapped external port status here.

(3) After the port mapping, the status column will show whether it is effective. At the same time, the

external port under the currently mapped public IP will be displayed in the external port. If users

need to access network devices through the public network, they need to use the currently

mapped external port to access.

[Save]: save the current settings.

[Cancel]: restores the last saved parameter.

5.9.2. Advanced Set

Advanced Set - >IP Filter

87