Текст страницы
8
EN
BEFORE THE FIRST USE
After unit transportation or storage at negative
temperature, unpack it and wait for 3 hours before
using.
upper part of the frying plate until the lock (6 and 7)
engages, make sure that the frying plates (8 or 9) are
securely fixed (Fig. 4).
• Before using the unit for the first time, it is
recommended to lubricate the frying plates (8 or 9)
with a small amount of vegetable oil.
• Close the waffle maker (Fig. 5) and plug the power
cord into mains socket; the indicator (4) will light up.
• When the indicator (4) goes off, unplug the power
cord from the mains socket and allow the waffle
maker to cool down completely.
• Take the handle (1), lift it onto the lock (2), open the
waffle maker (Fig. 1) with a paper napkin or clean
cloth, remove any remaining vegetable oil from the
frying plates (8 or 9).
Notes:
• Unpack the unit and remove all the packaging
materials.
• Keep the original package.
• Read the safety measures and operating
recommendations.
• Check the delivery set.
• Examine the unit for damages, in case of damage do
not plug it into the mains.
• Make sure that the indicated specifications of the
power supply voltage of the unit correspond to the
specifications of your mains. When the unit is used in
the mains with 60 Hz frequency, it does not need any
additional settings.
• Take the handle (1), lift the lock (2) and open the
waffle maker (Fig. 1).
Note: keep in mind that the waffle maker does not open
completely.
-
when you switch the unit on for the first time,
some smoke or foreign odor may appear. It is
normal and not covered by warranty.
-
the foreign odor can change the taste of the first
waffles that you made, so it is not recommended
to eat them.
MAKING WAFFLES
Make the dough.
- Install the waffle maker correctly.
- Set up waffle or churros frying plates (8 or 9).
• Simultaneously press the locks (6) and remove the
lower frying plate; similarly remove the upper frying
plate by pressing the locks (7).
• Wash the frying plates (8 and 9) with warm water and
neutral detergent, rinse, then wipe dry.
• Install the frying plates (8 or 9); to do this, first insert
the tabs on the frying plate (Fig. 3), then press the