Текст страницы
MT-SM1772A
USING THE DEVICE
•
Connect the device to the power supply. Use the Temperature controller to set the required heating temperature. The operation indicator light will light up to indicate that the appliance has started heating
up.
•
When the heating indicator lights up (the required temperature has been reached), cooking can begin.
•
Do not open the device while it is warming up.
•
Place cooking ingredients on the lower heating surface and close the lid. Be careful not to overfill the plate containers.
•
ATTENTION: Be careful, a small amount of steam may escape during cooking!
•
Cooking time depends on the type of product and your taste. On average, the cooking process takes 3-5 minutes
•
After 3-5 minutes, open the lid and remove the finished dish with a wooden spatula. To avoid damaging the non-stick coating, do not use sharp metal objects for this.
•
To retain heat for your next meal, close the lid.
•
When finished, unplug the appliance from the socket.
CLEANING AND MAINTENANCE
•
Unplug the device befor the cleaning.
•
Let the device to cool.
•
Working surface and edges should be wiped with paper towel or soft cloth.
•
If rest of stuffing stuck to the surface, pour a little bit oil on working surface and heat up for 1-2 minutes. Switch off the device and wipe the working surface after 4 minutes.
•
Outer parts of device might be cleaned with wet cloth. Avoid contact of inner part with liquids and oil.
•
Never sink the device into the water or other liquids.
•
Device can’t be washed in dishwasher.
•
Do not use abrasive agents, organic solvents and corrosive liquids.
SPECIFICATION
Power supply
230 V ~ 50 Hz
Producer:
Cosmos Far View International Limited
Room 701, 16 apt, Lane 165, Rainbow North Street, Ningbo, China
Made in China
WARRANTY DOES NOT COVER SUPPLIES (filters, ceramic and non-stick coating, rubber seals, etc.)
Production date is available in the serial number located on the identification sticker on the gift box and/or on sticker on the device. The serial number consists of 13 characters, the 4th and 5th characters
indicate the month, the 6th and 7th indicate the year of device production.
Producer may change the complete set, appearance, country of manufacture, warranty and technical characteristics of the model without notice. Please check when purchasing device.
6