Текст страницы
64 English
2) For other models, before adjusting heating level touch the
heating zone selection control button to select and activate
the cooking zone you wish to use. The heat setting indicator of
the selected zone flashes when it is active. You can adjust the
heat level as below:
Before adjust heating level, need to touching the heating
zone selection control button to select and active the cooking
zone you wish to use.
The heat setting indicator of the selected zone flashing when
be active, then you could adjust its heat level by below:
-Slider Touch control models:
; adjust heat setting by sliding the slider control.
Notes:
1. After connect to electricity, when power on, the buzzer of hob beeps once, all indicators
light up for 1 second then go out.
2. When the hob in Standby mode, if there is no practice within 1 minute, the electric hob
will auto turn off, with buzzer beeps once.
3. To turn on hob, press the ON/OFF control button and hold on for about 3 seconds; To
turn it off, just need to press ON/OFF button again.
4. The power level can be adjusted from 0 to 9, default setting is level 5.
5. The heat setting indicator of the selected zone flashing when adjusting.
After adjusting, the number flashing for 5 seconds then stop flashing, then the setting
is be confirmed.
6. The heat setting indicator of the selected zone will flash when adjusting. After
adjusting, the number in indicator will flash for 5 seconds and then stop flash, then the
setting be confirmed.