Текст страницы
63 English
Suggested Pan dimensions for induction hob
The cooking zones are, up to a limit, automatically adapted to the diameter of the pan.
However, the bottom of this pan is suggested to have a minimum of diameter according
to the corresponding cooking zone. To obtain the best efficiency of your hob, please place
the pan in the centre of the cooking zone.
Base diameter of the pots:
Cooking zone
Minimum (mm)
Maximum (mm)
160mm
140
160
180mm
140
180
210mm
160
210
280mm
230
280
Flexible zones
200
380 x 180
Using your Hob
To start cooking
1. After the hob be connected to electricity and power on. Press
and hold the ON/OFF
control button for about 3 seconds
till you hear a “beep” to turn the hob on. Now the hob enters
into Standby mode, all heat setting indicators and Timer setting
indicators shows “-”
2. Place a suitable pan on the cooking zone that you wish to use.
; Make sure the bottom of the pan and the surface of the
cooking zone are clean and dry.
3. Set heating level of cooking zone
1)For model MHI 4505:
; There is separate «+» and «-» heat level control button for each
cooking zone for these models. Set heat setting by touching the
«+» and «-» button for corresponding cooking zone.
; If press and hold either of the two buttons, the value will adjust
down or up rapidly, from 0 to 9 in circle.