Текст страницы
Yellow alignment lines
Install on «4»
Shimano 8-speed planetary hub
adjustment
— Set the Revo-shift lever to position 4.
Adjusting bolt
— Then turn the cable adjustment screw until the red line on
the push rod matches the end of the hub axis. Turning the
crank forward, move the Revo-shift from 3 to 1 and then
from 1 back to 3 two to three times to check the shift. Then
move the Revo-shift shifter back to 2 and check if the red
line on the push rod matches the end of the hub axis.
J APAN
C J -8S 20
LOCK
— After adjusting the crankshaft, tighten the cable adjusting
screw nut to secure the screw.
— Turn the cable adjustment screw until the
yellow setting lines match. Turning the crank
forward, move the Revo-shift from 4 to 1,
and then from 1 back to 4. Repeat two to
three times to check the shift. Check again
the alignment of the yellow setting lines.
The yellow alignment lines on the star lock are in
two places.
Use the one that is easier to see.
Yellow line
When the bike is stationary
Stock
Should be straight
Hub axle end
Drum
castle stars
Tighten
lock nut
LOCK
CJ-8S2 0
JAPAN
Visible red
piston line
Yellow mark on the lever
Holder
castle stars
Cable adjustment screw
When the bike is upside down
Lever movement
direction
Should be straight
Drum
castle stars
JAPAN
CJ-8S2 0
LOCK
Shimano planetary hub adjustment
— Set the Revo-shift to 2.
Holder
castle stars
Rim brake adjustment
— Establish brake shoes so that the brake surface of a shoe was parallel to the brake surface of
the rim and was located exactly in the middle.
— Tighten the adjustment screw on the brake lever all the way and unscrew it two turns.
Shimano 3-speed planetary hub adjustment
— Set the Revo-shift lever to position 2.
77
76