Текст страницы
9
EN
«ON/OFF» button (23) on the Remote Control (22) a
second time - the fan will be switched off.
• By pressing the «SPEED» «
» button (10) on the
control panel (4) or the «SPEED» «
» button (28)
on the remote control (22) you can select the airflow
speed, which will be displayed by indicators (14) on
the indication panel (3) as the «SPEED» symbol.
• The distance between the remote control and the fan
should not exceed 5 m, the coverage angle should
be up to 30 degrees.
• Avoid exposing the receiver to direct sunlight,
otherwise false activation of control commands is
possible.
• If you are not using the remote control (22), remove
the CR2025 battery.
Selecting the airflow mode
FAN USAGE
• Select the airflow mode either by pressing the
«NIGHT MODE» «
» (11) on the control panel (4)
or by pressing the «NIGHT MODE» «
» (25) on the
remote control (22).
• The airflow mode is displayed on the indication
panel (3) as the «STYLE» symbol and the following
indicators (21) «
»:
-
«
» normal mode - simple ventilation;
-
«
» the airflow speed will gradually increase and
decrease;
• Place the fan base (1) on a flat, dry, and steady
surface.
• Do not place the fan on soft surfaces, such as
carpets with high pile, sofas or beds.
• Insert the power plug (8) into the mains socket - the
digital symbols (19) will display the current room
temperature on the indication panel (3), and the
«TEMP» symbol (16) and «ºC» indicator (17) will
turn on.
Notes: numeric temperature readings may differ slightly
from other thermometer readings.
-
«
» «NIGHT MODE», the initial airflow speed
will gradually decrease until it reaches airflow
speed one.
Notes: once the «NIGHT MODE» is activated, the
indication panel (3) will go out; press any button to
switch the indication panel (3) on.
• Switching the fan on/off and selecting the airflow
speed
• To switch the fan on, press the «
» «ON/OFF»
power button (9) on the control panel (4) or the «
» «ON/OFF» button (23) on the remote control (22) -
the fan will be switched on.
• To switch the fan off, press the «
» «ON/OFF»
power button (9) on the control panel (4) or the «
»