Текст страницы
STAND FAN
Installation of the base
1. Remove all parts from the package,Place the stand on the
floor.
2. Insert the bottom rack into the stand and secure them with
the supplied plastic nut.
FAN SPEED
Turn the switch to select the desired valve rotation speed
• 0 turning off the fan;
• 1 low fan speed;
• 2 average fan speed;
• 3 High fan speed
ELECTRICAL CONNECTION
ATTENTION! The appliance must be connected to the main electrical network
in accordance with applicable laws and regulations.
• Make sure that the power from the main network is sufficient for the power supply system
is grounded in accordance with current regulations.
• Do not use adapters, extension cords, or «tees» to connect the appliance.
• If you need to replace the power cord, make sure that it meets current standards and
meets the product specifications.
ATTENTION! Before servicing the product, turn off the electrical power completely.
The manufacturer is not responsible for any direct or indirect damage caused by incorrect
installation or connection. Therefore, all installation and connection operations must be
performed by qualified personnel in accordance with applicable local and general regulations.
EXPLOITATION
1. After storing the appliance in a warehouse or transporting it at a temperature below 15 °C,
it must be kept at room temperature for at least 2 hours before switching it on.
2. Check the power supply characteristics, then connect the appliance to a power source.
ATTENTION! The appliance must be switched off after each use.
CLEANING AND CARE
ATTENTION! Disconnect the appliance from the power supply before cleaning, make
sure it is completely cold.
15
USER GUIDE