Текст страницы
English
Graphics Card Installation Guide
Hardware Installation
- Switch off your PC and unplug the power cable.
- Remove the case brackets corresponding to your GPU’s size.
3. Locate the PCIe x16 slot on your motherboard, insert the graphics card, and secure it with the
bracket screws.
- Connect the 16-pin power cable to the graphics card and make sure it is fully seated.
- For models with an 8-pin power connector, attach the 8-pin cable instead.
- Note: Some graphics cards do not require an external power connector. If this is the case,
you can skip this step.
Software Installation
- Install the NVIDIA App and Update Drivers
- Download the latest NVIDIA App from the official website.
(https://www.nvidia.com/en-us/software/nvidia-app/)
• Follow the on-screen instructions to install.
• Accept the NVIDIA Software License Agreement and complete the setup.
- Install Palit ThunderMaster.
- Download from Palit’s official website.
(https://www.palit.com/palit/thundermaster.php?lang=en)
• Use ThunderMaster to adjust fan settings, lighting effects, and performance tuning.
Safety Instructions
To ensure safe installation and usage:
• Always disconnect your computer from the power source before installation.
• Keep the product away from water or damp environments.
• Ensure ventilation openings are not blocked.
• Avoid placing the product near heat sources such as radiators.
• Place the system on a stable, flat surface to prevent damage.
• Keep power cables untangled and clear of walkways to avoid tripping hazards.
Stay Connected
Follow Palit on social media for updates and announcements.
For technical support, contact : support@palit.com.
For more information, visit www.palit.com.
© 2026 Palit Microsystems Ltd. All rights reserved.