Текст страницы
Installation instructions en
1. Make the cut-out for the appliance.
1. Insert the appliance together with the power cord
‒
When doing so, make sure that the permissible
dimensions are complied with.
into the opening in the unit from below until you
hear the brackets engage. Avoid impacts and put-
ting pressure on one side when doing so.
2. Make the cut-out for the exhaust air pipe either
2. Tighten the two fastening screws alternating
above the fitted unit or behind the fitted unit above
the appliance.
between the left and right. Use a suitable tool to
avoid damaging the surface.
3. Screw in the front two screws and select a hole so
that the surface of the appliance is flush with the fit-
ted unit.
4. Insert the two screw covers.
Unpacking the appliance
Unpack your appliance and check all parts for any
transport damage. Wear protective gloves when you
unpack the appliance.
ATTENTION!
The appliance frame is not a hand grip element.
▶
Do not lift the appliance by the frame.
Preparing the appliance
1. If air extraction is required, fit the backflow flaps on
the air outlet and click them into place.1
2. Carefully remove the protective foil from the surface.
Installing the appliance
Note: We recommend that installation is carried out by
two persons.
1
Depending on the appliance specifications
13